33USER MANUAL
If the PIN-code is not entered within 10 seconds or the input is incorrect, the siren will sound
one signal, the LED will produce the series of red and green flashes and the system will return to the
programming menu. Turn on ignition to exit programming mode.
Activate radio tags
The LED indicator will light red after entering the programming level. The system will wait for action.
Press the VALET button once to enable the radio tags. The system will confirm enabling with one short
sound signal of the siren and a green LED light. After that, the system will return to the programming
menu. Turn on ignition to exit programming mode.
Deactivating code immobilizer (pin-to-drive)
Press the VALET button 13 times to enter the programming level 13 after entering programming
mode.
Deactivate code immobilizer:
The LED indicator will be green after entering the programming level. The system will wait for entering
the ‘Secret PIN-code’. Enter the ‘Secret PIN-code’ that is written on the owner’s plastic card. The system
will confirm deactivating with two sound signals of the siren and a long red LED flash. After that, the
system will return to the programming menu. If the PIN-code is not entered within 10 seconds or the
input is incorrect, the siren will sound one signal, the LED will produce the series of red and green flashes
and the system will return to the programming menu. Turn on ignition to exit programming mode.
Activate code immobilizer:
The LED indicator will light red after entering the programming level. The system will wait for action.
Press the VALET button once to enable the radio tags. The system will confirm enabling with one short
sound signal of the siren and a green LED light. After that, the system will return to the programming
menu. Turn on ignition to exit programming mode.
To Next Page
Loading...
Need help?
General
