35USER MANUAL
LED indicator signals
Indicator status Description
Short red ashes System is armed
Fast red ashes Alarm
Short green ashes System is armed (a radio tag is in the coverage zone)
Lit red System is preparing for automatic arming
Orange ash ConrmsVALETbuttonpress
Orange ashes
(when switching on the ignition)
Conrmsthenumberofrecordedremotecontrols
Green ashes
(when switching on the ignition)
Conrmsthenumberofrecordedradiotags
Red ash
(when switching on the ignition)
Conrmsarecordedmobiledevice
Red and green ashes PIN-codeisconrmed
Faded System is disarmed
Checking the number of recorded remote controls/radio tags/mobile device
The number of recorded remote controls/radio tags/mobile device can be checked by the number
of orange, green and red flashes of the LED indicator. The number of recorded remote controls/tags/
mobile device can be checked when switching on the ignition (the system must be disarmed). The
number of orange flashes will indicate the number of recorded remote controls, the number of green
flashes will indicate the number of recorded radio tags, a following red flash will indicate mobile device
is recorded.
You can also check the number of recorded remote controls/radio tags/mobile device by taking off
and putting back on battery terminal. The system will emit short sound signals from a siren with less
than 1 sec. interval. The number of the signals equals to the number of recorded remote controls. After
a pause of 2 seconds, the system will emit short sound signals from a siren with less than 1 sec. interval.
The number of the signals equals to the number of recorded radio tags. After a pause of 2 seconds, the
system signal will indicate registered mobile device.