7USER MANUAL
This mode is disabled by default. Use the mobile app or Pandora AlarmStudio to enable it.
Anti-Hijack 2 mode
The Anti-Hi-Jack-2 mode helps to prevent aggressive seizure of a car using delayed engine blocking
on radio tag disappearance. The system constantly requests a response from a tag using a unique
algorithm when the ignition is on. If the system cannot detect a radio tag, the engine will be stopped
after 1 minute (general safety requirement for car movement). The siren will play the ‘ENGINE BLOCKING
WARNING’ ringtone before blocking. When warning signals end, the system will block the engine.
Engine blocking will occur immediately or at the time the car starts moving, it depends on block
implementation and system settings.
This mode is disabled by default. Use the mobile app or Pandora AlarmStudio to enable it.
Multi-button code immobilizer
Multi-button code immobilizer (pin-to-drive) is a function that allows disarming, disabling blocking
and controlling service mode and time channels using original vehicle controls (button, lever or pedal)
andapre-programmedPIN-code(the“ImmobilizerPIN-code”).Thefunctionworksusingspecialanalog
inputs or digital buses of a car.
An example of using the function:
• Turn on the ignition to disable engine blocking or enable service mode, turning on the ignition is not
required if you want to disarm the system or control time channels.
• Enter the“Immobilizer PIN-code”. Press a programmed button/lever/pedal the number of times
equals to the first digit. Pauses between presses should not exceed 1 second. More than 1 second
pause will be interpreted as the start of the next digit input. The immobilizer code can consist max
of 4 digits from 1 to 9.
• The system will confirm the correct input by a sound signal of the beeper and a programmed
function will be performed.
NOTE! iT is rEquirEd TO makE addiTiONal cONNEcTiONs aNd sETTiNgs TO usE This fuNcTiON.
To Next Page
Loading...
Need help?
General
