To Next Page

To Previous Page

Note:

• If the printer you need is not shown in the list, please click "Refresh" button to search

again. If it is not found, please check if the printer and computer are in the same network.

(Please see Chapter 5.3 for how to check).

• When the printer IP address changes under printer driver installed with host ID , you can

also directly print without re-installing the driver. If you need to install the printer driver with

the host ID, please check the option "Install the printer in the list with host ID".

6. After the installation, click "Print &Test Page" button. If your printer prints the test page

successfully, it means that you have installed the driver correctly.

3.1.2. Manual installation

• Before installing the drive, you need to learn about printer model by printing printer information

page out and check the product name (please refer to Chapter 9.1.1.3 for printing methods).

3.1.2.1. Installation via USB connection

1. Connect the printer to computer via USB cable, power the printer and computer on.

2. Place the attached installation CD in the computer CD-ROM:

• Windows XP system: automatically run the installation procedure.

• Windows 7/Vista/Server 2008 system: Pop up "Autoplay" interface, click “Autorun.exe” to run the

installation procedure.

• Windows 8 system: When the " DVD RW driver" window pops up from the right top corner of

computer desktop, click anywhere in the pop-up window, then click "Autorun.exe" to run the

installation procedure.

• Windows 10 system: When the "DVD RW driver" window pops up from the right top corner of

computer desktop, click anywhere in the window, then click "Autorun.exe" to run the installation

procedure.

Pantum P2510 Series User Manual

Questions and Answers: