Parkside 352096 2007 User Manual

18 GB/IE
Transport of the
pressure sprayer
Transport the pressure sprayer
as follows:
Transport during use
Hang the pressure sprayer with the
carrying strap
6
over your shoulder.
Note: Make sure that the pressure
sprayer is always in an upright position.
Only then can the pressure sprayer func-
tion properly.
Transport after use
Press the pump handle
1
down and turn
it clockwise.
Pull the safety valve
3
to the side as far
as it will release the residual pressure in
the container
5
.
Carry the pressure sprayer by the pump
handle
1
or using the carrying strap
6
.
Note: To avoid damage to the contai ner
5
during transport, always lift the pres-
sure sprayer and do not drag it across
the ground.
Cleaning and care
If the nozzle seems to be blocked, do
not try to blow it free with your mouth.
Note: Clean the pressure sprayer after ea ch
use! Empty the bottle after each use.
Clean the pressure sprayer
Unscrew the spray nozzle
7
.
Clean the spray nozzle
7
under running
water.
If the spray nozzle
7
is clogged, clean
the nozzle
7
by pushing a needle
through it.
Flush through the pressure sprayer, hoses
and tubes with water.
Clean the surfaces of the product with
a moist cloth.
Cleaning the hose and pump
To clean the parts, follow these steps:
Loosen the union nut (Hose)
10 b
on the
hose
12
on the handle
11
and on the
hose connection on the cover
14
.
Turn the pump handle
1
counterclock-
wise. Loosen the pump
2
and pull it out
from the cover
14
.
Clean the hose
12
and the pump
2
under running water.
After cleaning, reinsert the pump
2
into
the opening provided for this purpose on
the cover
14
and screw this back onto
the container
5
.
Fasten the hose
12
onto the hose connec-
tion on the cover
14
and the handle
11
of the spray tube
8
once more.
Tighten the union nut (Cover)
9
securely.
Store the pressure sprayer
Release any residual pressure still pre-
sent in the container after use. To do this,
pull the safety valve button to the side
until you can no longer hear the hiss of
escaping air.
Thoroughly clean the device and allow
it to dry before you put it away for the
winter. This will avoid frost damage.
Fold the foot step by pressing the “PUSH”
button before transport the product.

Parkside 352096 2007 Specifications

General

Brand	Parkside
Model	352096 2007
Category	Paint Sprayer
Language	English