Parkside 352096 2007 User Manual

19 GB/IE
Clean the pressure sprayer before
storing it away.
Remove any leftover spray product from
the container
5
and the tube.
Store the pressure sprayer in a dry, dust-
free place away from frost.
Troubleshooting
If the measures listed below are not successfu l,
contact the manufacturer.
= Fault
= Potential causes
= Remedies
No pressure is established
in the container.
The pump is not firmly screwed into place.
Screw the pump firmly into place.
The sealing ring of the pump
2
has not
been greased.
L oosen the pump cover
2 a
from the p ump
2
. Check the sealing ring or gasket of
the pump
2
, grease the sealing ring of
the pump.
Spray nozzle does not spray.
No pressure present.
Generate pressure using the pump.
The spray nozzle is blocked.
Clean the spray nozzle.
No spray in the container
5
.
Fill with spray.
The spray head is set between 2 spray
functions.
Set the spray head right.
Disposal
The packaging is made entirely of recyclable
materials, which you may dispose of at local
recycling facilities.
Contact your local refuse disposal authority
for more details of how to dispose of your
worn-out product.
Service
Service Great Britain
Tel.: 08000569216
E-Mail: owim@lidl.co.uk
Service Ireland
Tel.: 1800 200736
E-Mail: owim@lidl.ie

Parkside 352096 2007 Specifications

General

Brand	Parkside
Model	352096 2007
Category	Paint Sprayer
Language	English