47
MT
GB
.................................. 7.5 l/min
Sound pressure level
pA
) .......................
pA
= 3 dB
Sound power level
WA
)
measured ...
WA
= 2,24 dB
..........................
Vibration
h
) .....< 2.5 m/s
2
The values for noise and vibration were
EN 60335-2-79:2012.
Do not exceed the maximum permitted
network impedance of 0.385 Ohms at the
electrical connection point.
The user must ensure that the device is
operated only on a power supply network
If necessary, the local power supply com-
pany can be asked for the system imped-
ance.
carried out in the course of further develop-
ment without notice. All dimensions, refer-
ences and information of this instruction
of the instruction manual, cannot thus be
considered as valid.
The stated vibration emission value was
measured in accordance with a standard
-
pare one power tool to another.
The stated vibration emission value may
also be used for a preliminary exposure
assessment.
Warning: The vibration emission
of the power tool from the stated
which the power tool is used.
Try to keep the exposure to vibra-
tions as low as possible. Examples
of measures to reduce vibration
when the electric tool is switched off
and times when it is switched on but
Notes on Safety
This section is concerned with the basic
-
sure cleaner.
Explanation of symbols
Attention!
-
how they function and operate. Ask
a specialist if necessary.
socket as soon as the power lead is
leaks.
The pressure cleaner is not suitable
water supply system.
Electric appliances should not be dis-
never in a reclined
position.
To Next Page
Loading...
Need help?
General
