53
MT
GB
4. Turn off the water tap.
5. Disconnect the pressure cleaner from
the water mains.
Using detergents
-
stances could impair the safety of the pres-
Cleaning and
Maintenance
-
ry maintenance operation. This also
There is a risk of electrocution or of
Cleaning
Never direct the water jet
against the pressure cleaner,
nor clean the pressure clean-
could give rise to the danger
of electric shock and damage
the pressure cleaner!
Always keep the pressure cleaner
clean. Do not use any detergents or
solvents.
• Always keep the ventilation slots clean
and free.
• Only clean the pressure cleaner with a
soiled or blocked, you can remove any
the nozzle tip to move the two metal
plates in the nozzle away from each
other. This enables you to reach the
-
ard Vario nozzle with water to remove
Maintenance
The pressure cleaner is maintenance free.
Ask our service centre to car-
ry out any work that is not
described in these instruc-
tions. Use only original parts.
Storage
• Drain all the water from the pressure
cleaner.
Disconnect the unit from the water sup-
ply.
than 1 minute until no more water es-
. Turn off the
unit.
•
-
wards.
• Protect the pressure cleaner and its ac-
cessories from frost when they have not
been completely drained of all water.
• Store the pressure cleaner and its ac-
cessories in a frost-free room.
To Next Page
Loading...
