PTS 20-Li A1
■ 32
│
GB
│
IE
Approved cutting disc designs:
Diamond-coated, disc diameter 85 mm, disc
thickness max. 1.8 mm
■ Always wear a dust mask!
■ Always wear ear muffs!
Circular saw blades (symbols)
Wear ear muffs!
Wear safety goggles!
Wear safety shoes!
Wear protective gloves!
Wear a dust mask!
Not approved for wet grinding!
Approved diameter of tools
Not approved for side grinding
Safety instructions for grinding tools
a) General
Grinding tools are susceptible to breakage; therefore
extreme care is required when handling grinding
tools. Using damaged, incorrectly clamped or
incorrectly installed grinding discs is dangerous
and may cause serious injury.
b) Handling, transport and storage
Grinding tools are to be treated with care and
transported carefully. Grinding tools should be
stored in such a way that they are not exposed to
mechanical damage or harmful environmental
influences.
Original accessories/attachments
■ Use only the accessories and additional equip-
ment specified in the operating instructions and
which are compatible with the appliance.
WARNING!
■ Do not use any accessories that are not
recommended by PARKSIDE. This can lead to
electric shock and fire.
Safety guidelines for battery
chargers
■ This appliance may be used by
children aged 8 years and above
and by persons with limited physical,
sensory or mental capabilities or
lack of experience and knowledge,
provided that they are under super-
vision or have been told how to use
the appliance safely and are aware
of the potential risks. Do not allow
children to play with the appliance.
Do not allow children to carry out
cleaning and user maintenance
tasks unless they are supervised.
The charger is suitable for indoor use
only.
WARNING!
■ To avoid potential risks, damaged mains cables
should be replaced by the manufacturer, their
customer service department or a similarly
qualified person.
IB_308629_PTS20-LiA1_LB8.indb 32 13.03.2020 08:37:06
To Next Page
Loading...
Need help?
General
