EasyManuals Logo
Home>Parkside>Grinder>PWSA 12 B1

Parkside PWSA 12 B1 User Manual

Parkside PWSA 12 B1
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #10 background imageLoading...
Page #10 background image
10
GB IE NI CY
Safety instructions for
all applications
Common safety instructions
for grinding and cutting:
This electric tool is to be
used as a grinder and
cutting grinder. Follow
all safety instructions, di-
rectives, illustrations and
facts which you receive
with the device. If you do
not follow these instructions,
an electrical shock, re and/
or serious injury may occur.
This electric tool is not
suitable for sanding,
wire brushing and pol-
ishing. Using the electric
tool in ways for which it is not
intended may cause hazards
and injuries.
Do not use any ac-
cessories that are not
specically intended
and recommended for
this electric tool by the
manufacturer. Simply be-
cause an accessory can be
attached to your electric tool
does not guarantee safe op-
eration.
The allowable rotation
speed of the attachment
tools must be at least as
high as the highest rota-
tion speed indicated on
the electric tool. Acces-
sories that run faster than the
allowable speed can break
and y apart.
The outside diameter
and thickness of the at-
tachment tool must cor-
respond to the dimen-
sions indicated for your
electric tool. Attachment
tools which are wrongly
dimensioned cannot be suf-
ciently shielded or controlled.
Attachment tools with
threaded attachment
must t the threading
of the grinding spindle
exactly. For attachment
tools which are mount-
ed through a ange,
the diameter of the hole
in the attachment tool
must t the mounting
diameter of the ange.
Attachment tools which can-
not be precisely attached to
the electric tool turn unevenly,
vibrate very strongly and can
ultimately lead to a loss of
control.
Never use damaged at-
tachment tools. Check
attachment tools such as
grinding discs for chip-
ping or cracks, grinding
plates for cracks, wear
or strong abrasion be-
fore using them. If the
electric tool or the at-
tachment tool falls off,
check whether it is dam-
aged or use an undam-
aged attachment tool.
If you have checked the
attachment tool and at-
tached it, keep yourself
and any nearby persons

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Parkside PWSA 12 B1 and is the answer not in the manual?

Parkside PWSA 12 B1 Specifications

General IconGeneral
BrandParkside
ModelPWSA 12 B1
CategoryGrinder
LanguageEnglish

Related product manuals