18
GB IE NI CY
Exert only moderate pressure on the work-
pie
ce. Move the device evenly back and
forth.
A working angle of 30° to 40° achieves
the best results for scrub grinding.
Cleaning and
maintenance
Contact our Service Centre about
repairs and servicing not described
in this manual. Only use OEM
parts. Risk of injury!
Turn off the appliance and, before
doing any servicing, remove the
battery.
The following cleaning and servicing
should be done regularly. This will ensure
a long and reliable service life.
Always check the device before using it for
obvious deciencies such as loose, worn
or damaged parts, correct the position-
ing of screws or other parts. Examine the
grinding disc in particular. Exchange the
damaged parts.
Cleaning
Do not use any cleaning agent or
solvent. Chemical substances can
etch the plastic parts of the device.
Never clean the device under run-
ning water.
• Thoroughly clean the device after every
use.
• Clean the ventilation openings and the
surface of the device with a soft brush
or cloth.
Storage
• Store the appliance in a dry place well
out of reach of children.
• Remove the battery before storing the
unit for longer periods of time
• Grinding discs must be dry and stored
upright and should never be stacked.
Disposal and protection
of the environment
Remove the battery from the device and take
the device, battery, accessories and packag-
ing for environmentally friendly recycling.
Machines do not belong with do-
mestic waste.
• Return the unit to a recycling centre.
The plastics and metals in the unit can
be sorted and appropriately recycled.
Ask our Service Centre for details.
• Defective units returned to us will be
disposed of for free.
To Next Page
Loading...
Need help?
General