EasyManuals Logo
Home>Parkside>Grinder>PWSA 12 B1

Parkside PWSA 12 B1 User Manual

Parkside PWSA 12 B1
108 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
10
GB IE NI CY
During a longer storage period, check
the state of charge of the battery and
recharge if necessary roughly every
3months.
Wall mounted charger
(optional)
You can also mount the charger (3) on the
wall.
Using dowels, place two screws 54mm
apart at the desired position of a wall.
The screw head can have a diameter
of 6 - 10 mm
Leave the screw heads protruding at a
distance of approx. 10 mm from the wall.
With the openings of the wall bracket,
you can attach the charger (3) to the
two screws and pull the charger down
until it stops.
When drilling, be careful not
to damage any supply lines.
Use suitable search devices
to nd these or consult an in-
stallation plan for guidance.
Contact with electrical cables
can lead to electric shock and
re. Contact with a gas pipe
can result in an explosion.
Damage to a water pipe can
lead to property damage and
electric shock.
Cleaning
Clean the rechargeable battery (1) and
charger (3) with a dry brush or dry cloth.
Keep the rechargeable battery (1) and
charger (3) away from moisture and sharp
objects.
Maintenance
The device is maintenance free.
Disposal and protection
of the environment
Remove the battery from the device and take
the device, battery, accessories and packag-
ing for environmentally friendly recycling.
Machines do not belong with do-
mestic waste.
Do not dispose of batteries in house-
hold waste, re (risk of explosion) or
water. Damaged batteries may dam-
age the environment and your health
if toxic fumes or liquids leak out.
Hand the device and the charger in to
a recycling point. The plastic and met-
al parts used on your device can be
properly sorted according to materials
and grades and efciently recycled.
Please contact our service centre for
more information.
Dispose of batteries in a discharged
state. We recommend covering the
contacts with an adhesive strip to pro-
tect against short circuits. Do not open
the battery.
Dispose of the batteries according to
local standards. Hand in the batter-
ies at a used battery collection point
where they are recycled in an envi-
ronmentally friendly manner. For more
information, please contact your local
waste management provider or our
service centre.
Defective units returned to us will be
disposed of for free.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Parkside PWSA 12 B1 and is the answer not in the manual?

Parkside PWSA 12 B1 Specifications

General IconGeneral
BrandParkside
ModelPWSA 12 B1
CategoryGrinder
LanguageEnglish

Related product manuals