Parkside PWSA 12 B1 User Manual

5
NI CYIEGB
General description
See the front fold-out page for
illustrations.
Extent of the delivery
Carefully unpack the appliance and check
that it is complete. Dispose of the packag-
ing material correctly.
- Device
- Cutting disc (preassembled)
- Battery-charger
- Battery
- Hex key (4 mm)
- Storage case
- Instruction Manual
- Instruction Manual Battery/Charger
Description of functions
The cordless angle grinder is suitable for
cutting and grinding metal, stone and
wood materials, plastic, tiles and non-
ferrous metals. There is a special disc for
each of the separate applications. Please
refer to the information from the disc manu-
facturer.
Please refer to the descriptions below for
information about the operating devices.
Overview
1 Protective hood
2 Cutting disc
3 Clamping screw
4 Spindle stop button
5 On/off switch
6 Battery Indicator (3LEDs)
7 Handgrip
8 Battery release button
9 Battery
10 Storage case
11 Hex key
12 Charger
13 Mounting ange
14 Clamping ange
Technical data
Cordless angle grinder ...PWSA 12 B1
Rated input voltage ......................12 V
Idling speed (n) .....................19500 min
-1
Dimensions of cutting/
grinding disc ................... Ø 76 x 10 mm
Bore hole ................................Ø 10 mm
Maximum diameter
Cutting/grinding disc ............... Ø 76 mm
Thickness of cutting/
grinding discs ..................... max. 6.5 mm
Grinding spindle thread ..................... M5
Sound pressure level
(L
pA
) .................... 63.1dB(A); K
pA
= 3 dB
Sound power level (L
WA
)
measured .......... 74.1 dB(A); K
WA
= 3 dB
Vibration (a
h
) .... 2.275 m/s
2
; K= 1.5 m/s
2
The vibration values represent maximum
values which have been determined with the
sup
plied blade. The actual vibration values
may vary depending on the used acces-
sories.
The vibration values are still affected by the
handling for the user‘s.
Cutting disc PTS 76 (included):
Idling speed n
0
............. max.20300 min
-1
Disc speed ....................... max. 80 m/s*
Outer diameter ........................ Ø 76 mm
Bore hole ................................Ø 10 mm
Thickness ......................................1 mm
* The grinding disc must keep a rotational
speed of 80 m/s.
You can use all grinding tools mentioned in
these operating instructions.

Parkside PWSA 12 B1 Specifications

General

Brand	Parkside
Model	PWSA 12 B1
Category	Grinder
Language	English