Pfaff 242 User Manual

Adjustment
11 - 7
11.04.06 Driving motion of the feed dog (for PFAFF 242 and 1242)
Requirement
With the longest stitch set and the needle bar at its BDC, the feed dog should not move
when the reverse-feed lever is operated.
Fig. 11 - 06
● Set the longest stitch.
● Loosen screws 1 far enough so that the eccentric 2 can only be turned on the shaft with
difficulty.
● Bring the needle bar to its BDC.
● Turn eccentric 2 so that its largest eccentricity is facing „downwards“, then turn it a little
in the direction of rotation in accordance with the requirement.
● Tighten screws 1.
1
2

Pfaff 242 Specifications

General

Brand	Pfaff
Model	242
Category	Sewing Machine
Language	English