9
Telescoping thread guide
Pull the telescoping thread guide upward to
its highest position.
The two upper telescopes must be rotated
slowly until their locking balls are heard to
lock into place.
Attaching the thread unreeling discs and the
thread nets
Pull the cone thread adapter off the spool
pin when using a small spool. Place the
spool on the spool pin in such a way that the
slit is at the top and place the thread unreel-
ing disc on top of the spool.
If the thread jumps off the spool during
threading or sewing or if it slips out of the
thread tensioners when sewing rolled hems,
pull the enclosed net over the spool, as
shown in the illustration. In this way, you
can prevent the thread from jamming.
Presser foot lifter
The presser foot can be raised and lowered
using the presser foot lifter.
The presser foot must always be lowered
when the machine is used.
presser foot
lifter
cone thread
adapter
thread unreeling discs
slit
thread net
spool
pin
spool
pin
standard
presser foot
stops
spool pin
thread
guides
telescoping
thread guide
To Next Page
Loading...
Need help?
General
