7
wall socket
lead cord/plug
connection socket
foot control plug
foot control
main switch
main switch
Connecting the machine to the mains power supply
Switch the main switch to OFF.
Plug the foot control plug into the connection socket on the machine.
Plug the lead cord/plug into the wall socket.
Switch the main switch to ON.
Notes on safety
This appliance has a polarized plug (one blade wider than the other).
To reduce the risk of electric shock, it is designed to fit into a polarized outlet only one
way. If the plug does not fit correctly into the outlet, reverse the plug. If it still does not
fit, contact a qualified electrician to install the proper outlet.
Do not modify the plug in any way.
Foot controller type YC-482J (120 V)/YC-550 (230 V)/YC-551 (240 V) has to be used with
this overlock machine.
For the USA and Canada
This sewing machine has a polarized plug (one blade wider than the other). To reduce
the risk of electric shock, this plug is intended to fit in a polarized outlet only one way.
If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact
a qualified electrician to install the proper outlet. Do not modify the plug in any way.
To Next Page
Loading...
Need help?
General
