8
Connect Devices
8.1
About Connections
Connectivity Guide
Always connect a device to the TV with the highest
quality connection available. Also, use good quality
cables to ensure a good transfer of picture and
sound.
When you connect a device, the TV recognizes its
type and gives each device a correct type name. You
can change the type name if you wish. If a correct
type name for a device is set, the TV automatically
switches to the ideal TV settings when you switch to
this device in the Sources menu.
Antenna port
If you have a Set-top box (a digital receiver) or
Recorder, connect the antenna cables to run the
antenna signal through the Set-top box and/or
Recorder first before it enters the TV. In this way, the
antenna and the Set-top box can send possible
additional channels to the Recorder to record.
HDMI ports
HDMI Quality
An HDMI connection has the best picture and sound
quality. One HDMI cable combines video and audio
signals. Use an HDMI cable for High Definition (HD)
TV signals.
For best signal quality transfer, use an Ultra High
Speed certified HDMI cable and do not use an HDMI
cable longer than 5 m.
If a device connected with HDMI is not working
correctly, check if a different HDMI Ultra HD setting
can solve this problem. In Help, press the colour
key Keywords and look up HDMI Ultra HD.
Copy protection
HDMI ports support HDCP (High-bandwidth Digital
Content Protection). HDCP is a copy protection signal
that prevents copying content from a DVD disc or Blu-
ray Disc. Also referred to as DRM (Digital Rights
Management).
HDMI ARC and eARC
Only HDMI 2 on the TV supports HDMI ARC (Audio
Return Channel) and HDMI eARC.
If the device, typically a Home Theatre System (HTS),
soundbar or AV receiver, also has the HDMI ARC
connection, connect it to HDMI 2 on this TV. With the
HDMI ARC connection, you do not need to connect
the extra audio cable that sends the sound of the TV
picture to the HTS. The HDMI ARC connection
combines both signals.
You can use any HDMI connection on this TV to
connect the HTS but ARC is only available for 1
device/connection at a time.
HDMI eARC (Enhanced Audio Return Channel) is an
advancement over the previous ARC. It covers all ARC
features but with higher bandwidth and speed. eARC
supports high quality audio transmission up to192kHz,
24-bit, uncompressed 5.1 and 7.1, and 32-channel
uncompressed audio.
Note: HDMI eARC is only available on HDMI 2.
Use Ultra High-speed HDMI cable for eARC. Only
one eARC device is available at a time.
HDMI CEC - EasyLink
Connect HDMI CEC-compatible devices to your TV,
you can operate them with the TV remote control.
EasyLink HDMI CEC must be switched on on the TV
and the connected device.
Switch on EasyLink
Settings > Channels &
Inputs > Inputs > EasyLink > EasyLink > On.
Operate HDMI CEC-compatible devices with TV
remote control
Settings > Channels &
27
To Next Page
Loading...
Need help?
General
Weight and Dimensions
