Automatic Software Update
To switch on Automatic software update to update
your TV software automatically. Leave the TV in
standby.
1 - Select Settings > System > About > System
update > Automatic Software Update.
2 - Follow the on-screen instruction.
3 - Press (left) repeatedly if necessary, to close
the menu.
When the setting is enabled, the upgrade gets
downloaded when the TV is powered ON and
installed 15min after the TV has gone to standby (as
long as there are no alarms scheduled).
When the setting is disabled, the "Upgrade Now" /
"Later" OSD will be shown.
View Software Update History
Display the list of software versions that are
successfully update on the TV.
To view the software update history:
1 - Select Settings > System > About > System
update > View software update history.
2 - The software update history on this TV will be
listed.
Reset
Rinstall TV
Settings > System > About > Reset > Factory
reset.
Reset and redo the complete TV installation.
Reset all settings value to original TV settings
Settings > System > About > Reset > Factory
settings.
Reset all settings to factory settings.
Status
Display TV status information
Settings > System > About > Status.
To display the TV status about IP address, Device,
MAC address, Bluetooth® address, Serial Number, etc.
Legal Information
Open Source Software
This television contains open source software. TP
Vision Europe B.V. hereby offers to deliver, upon
request, a copy of the complete corresponding
source code for the copyrighted open source
software packages used in this product for which such
offer is requested by the respective licences.
This offer is valid up to three years after product
purchase to anyone in receipt of this information.
To obtain the source code, please write in English to...
open.source@tpv-tech.com
Open Source License
About Open Source License
README for the source code of the parts of TP
Vision Europe B.V. TV software that fall under open
source licenses.
This is a document describing the distribution of the
source code used on the TP Vision Europe B.V. TV,
which fall either under the GNU General Public
License (the GPL), or the GNU Lesser General Public
License (the LGPL), or any other open source license.
Instructions to obtain copies of this software can be
found in the Directions For Use.
TP Vision Europe B.V. MAKES NO WARRANTIES
WHATSOEVER, EITHER EXPRESS OR IMPLIED,
INCLUDING ANY WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR
PURPOSE, REGARDING THIS SOFTWARE. TP Vision
Europe B.V. offers no support for this software. The
preceding does not affect your warranties and
statutory rights regarding any TP Vision Europe B.V.
product(s) you purchased. It only applies to this
source code made available to you.
System Information
To view the current TV software version:
1 - Select Settings > System > About > Model,
Android TV OS version, Android security patch level,
Kernel version, Android TV OS build, SW version,
Netflix ESN, Nagra device ID.
2 - The version, release notes and creation date are
shown. Also, the Netflix ESN Number and other
information are shown if available.
3 - Press (left) repeatedly if necessary, to close
the menu.
55
To Next Page
Loading...
Need help?
General
Weight and Dimensions
