Philips AJH510 User Manual

12 EN
6 Other features
Set sleep timer
This alarm clock can switch to standby mode
automatically after a preset period.
Press SLEEP repeatedly to select the sleep
timer period (in minutes).
» When the sleep timer is activated,
appears.
To deactivate the sleep timer, press SLEEP
repeatedly until [OFF] (off) appears.
Charge your devices
With this alarm clock, you can charge your
external devices, such as your cell phone, MP3
player or other mobile devices.
1 Use a USB cable to connect the USB
charging socket of the alarm clock with the
USB socket of your devices.
15 30 60 90 120
OFF
2 Connect the alarm clock to power.
» Once the device is recognized, the
charging starts.
Note
• Philips does not guarantee the compatibility of this
product with all devices.
• The USB charging port is for charging only.
Select daylight saving time
(DST) mode
For countries with daylight saving time (DST),
the alarm clock offers you DST option to adjust
summer time.
In standby mode, press and hold 12/24H·DST
for two seconds.
» DST appears on the display panel.
» The clock advances by one hour.
Note
• To exit DST mode, repeat the above operation.

Philips AJH510 Specifications

General

AC input voltage	100-240 V
AC input frequency	50 - 60 Hz
Number of batteries supported	1
Snooze function	Yes
Package weight	730 g
RMS rated power	0.6 W
Display type	LED

Weight and Dimensions

Weight	350 g
Dimensions (WxDxH)	144 x 65 x 144 mm