EasyManuals Logo
Home>Philips>Recording Equipment>CDR785/01C

Philips CDR785/01C User Manual

Philips CDR785/01C
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #28 background imageLoading...
Page #28 background image
Recording of an entire disc or a track with automatic
start
Important:
– Recording from CD-changers should always be started in
the Auto-Start mode.
For recording from external CD changers do not use
AUX
MANUAL
, but AUX TRACK or AUX CD.
1 Make sure that the CDR(W) is absolutely free of scratches
and dust particles.
2 Press repeatedly AUX to select the input for the external
source you want to record from.
AUX DIGITAL is displayed if the digital coaxial
input is selected.
AUX OPTICAL is displayed if the digital optical input
is selected.
AUX ANALOG is displayed if the analogue input is
selected.
3 Press REC TYPE on the set to enter into the recording menu.
4 Rotate ¡ JOG CONTROL to select either:
AUX CD ?: for recording with synchronised start of an
entire disc
AUX TRACK ?: for recording with synchronised start
of a track
5 Press YES to confirm your selection.
WAIT is displayed for a few seconds.
START SOURCE is shown.
Notes:
– If CHECK INPUT is flashing, check the digital
connection.
– If required the recording level can be set first, using the
REC LEVEL key. See “Rec Level key” under “Recording
General”.
6 Start playback on the selected source.
The CD recorder starts to record simultaneously and
recording in progress is shown. The remaining recording
time left of the CDR(W) is displayed.
Note: If you start playback on the selected source within a
track, recording starts at the beginning of the next track
or after 2.7 seconds of silence in analogue recordings.
7 If a digital source is selected:
After the recording process, the CD recorder stops
automatically.
Note: Recordings from DAT or DCC will automatically stop
after 20 seconds silence.
If an analogue source is selected:
After the recording process, the CD recorder stops after a
silence of 20 seconds on the source material.
To stop recording manually, press STOP 9 on the set.
RECORDING IN PROGRESS goes off.
Important:
If you want to play the recorded CDR disc on any
regular CD player, it must first be finalised. See
finalising discs.
Finalised CDRW discs play only on CDRW compatible
CD players.
Recording with automatic synchronized start
EXTERNAL RECORDING
28
English

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Philips CDR785/01C and is the answer not in the manual?

Philips CDR785/01C Specifications

General IconGeneral
BrandPhilips
ModelCDR785/01C
CategoryRecording Equipment
LanguageEnglish

Related product manuals