Manual recording from an external source
1 Make sure that the CDR(W) is absolutely free of scratches
and dust particles.
2 Press repeatedly AUX to select the input for the external
source you want to record from.
➜ AUX DIGITAL is displayed if the digital coaxial
input is selected.
➜ AUX OPTICAL is displayed if the digital optical input
is selected.
➜ AUX ANALOG is displayed if the analogue input is
selected.
3 Press REC TYPE on the set to enter into the recording menu.
4 Rotate ¡ JOG CONTROL ™ to select the record type.
➜ AUX MANUAL ?: for manual start of recording
5 Press YES to confirm your selection.
➜ WAIT is displayed.
➜ RECORD ? , AUX and the remaining recording time of
the CDR(W) are displayed.
6 Start playback on the external source in order to set the
optimal recording level on the CD recorder (see “REC LEVEL
key”).
Note: If CHECK INPUT is flashing, check the digital
connection.
7 Stop playback on the external source.
8 Go to the beginning of the desired track.
9 Press YES on the set and simultaneously start playback on
the external source.
➜ The CD recorder starts to record and recording in
progress is shown. The remaining recording time left of
the CDR(W) is displayed.
10 Press STOP 9 on the set to stop recording.
➜ UPDATE is displayed and RECORDING IN PROGRESS goes
off.
Manual microphone recording
1 Make sure that the CDR(W) is absolutely free of scratches
and dust particles.
2 Set MIC LEVEL to the minimum level to prevent acoustic
feedback (e.g. a loud howling sound) before you connect the
microphone.
3 Connect a microphone to MIC.
4 Press repeatedly AUX to select the input for the external
source you wish to mix the microphone with.
5 Press REC TYPE on the set to enter into the recording menu.
6 Rotate ¡ JOG CONTROL ™ to select the record type:
➜ AUX MIX MIC: the microphone is mixed to the
external source.
➜ MIC ONLY: only the microphone is recorded.
7 Press YES to confirm your selection.
➜ WAIT is displayed.
➜ RECORD ?, AUX and the remaining recording time of
the CDR(W) are displayed.
8 Set the optimal recording level on the CD recorder (see
“REC LEVEL key”).
•In addition you can also set the optimal recoding level of
the microphone by turning MIC LEVEL.
9 If AUX MIX MIC is selected:
Press YES on the set and simultaneously start playback on
the external source.
➜ The CD recorder starts to record and recording in
progress is shown. The remaining recording time left of
the CDR(W) is displayed.
If MIC ONLY is selected:
Press YES on the set to start recording.
➜ The CD recorder starts to record and RECORDING IN
PROGRESS is shown. The remaining recording time left of
the CDR(W) is displayed.
10 Press STOP 9 on the set to stop recording.
➜ UPDATE is displayed and RECORDING IN PROGRESS goes
off.
To Next Page
Loading...
Need help?
General
