Philips DVP5990 User Manual

English
17
Connecting to an Analog
Stereo System
You can connect this unit to a two
channel stereo system (e.g. mini system,
analog receiver) in order to enjoy stereo
sound output.
A Connect the audio/video cables
(red/white - supplied) from the
AUDIO OUT L/R jack on this unit to
the audio input jacks (red/white) on your
connecting device. Leave the yellow
video cable disconnected.
B For video connection, see ‘Basic
Connections - Step 1: Connecting to
television’ for details.
Helpful Hint:
– See ‘Setup Menu Options - Audio Setup
Page’ for optimum audio settings.
Optional Connections
Connecting to a Digital AV
Ampli er/Receiver
You can connect this unit to an AV
ampli er/receiver in order to enjoy
quality sound.
A Connect a coaxial cable (not supplied)
from the COAXIAL DIGITAL OUT
jack on this unit to the digital coaxial
input jack of the connected device.
B For video connection, see ‘Basic
Connections - Step 1: Connecting to
television’ for details.
Helpful Hint:
– You have to set the appropriate Digital
Audio Output setting. Otherwise, no sound or
interference may occur. See ‘Setup Menu
Options - Audio Setup Page - Digital Audio
Setup’ for details.
AV Receiver
AUDIO
IN
DIGITAL
STEREO
AUDIO
IN
DIGITAL
Audio
(red/white cables)
dvp5990_5992_37_Eng1.indd 17dvp5990_5992_37_Eng1.indd 17 2008-03-10 10:47:22 AM2008-03-10 10:47:22 AM

Philips DVP5990 Specifications

Power

power supply frequency	50Hz
power supply voltage	230V
power consumption	< 12 W
standby power consumption	< 1.0 W

Sound

D/A converter	24 bit, 192 kHz
signal to noise ratio	> 90
distortion and noise (1kHz)	> 65 dB
crosstalk (1kHz)	> 70 dB
dynamic range (1kHz)	> 80 dB
frequency response	30-20000 Hz

Picture and Display

D/A converter	12 bit, 108 MHz
picture enhancement	Progressive scan, High Def (720p, 1080i, 1080p), Video Upscaling (720p, 1080i/p)

Weight and Dimensions

set dimensions	435 x 38 x 210 mm
packaging dimensions	490 x 82 x 296 mm
set weight	1.4 kg