Philips DVP5990 User Manual

English
41
Audio Setup Page (underlined options are the factory default settings)
Setup Menu Options (continued)
CD Upsampling
Night Mode
This feature enables you to convert the music CD to a
higher sampling rate using sophisticated digital signal
processing for better sound quality. If you have activated
the CD upsampling, this unit automatically switches to
stereo mode.
{ Off } – Disable CD-upsampling function.
{ 88.2 kHz (X2) } – Convert the sampling rate of the CDs
to twice as high as the original rate.
{ 176.4 kHz (X4) } – Convert the sampling rate of the CDs
to four times as high as the original
rate.
Note: CD upsampling is only possible when playback the music
CD in stereo mode.
This mode optimizes playback of sound at low volume. High
volume outputs will be softened and low volume outputs will be
enhanced to an audible level. This feature is only applicable for
DVD video discs with Dolby Digital mode.
{ On } – Turn on night mode.
{ Off } – Turn off night mode. Select this to
enjoy the surround sound with its full
dynamic range.
dvp5990_5992_37_Eng1.indd 41dvp5990_5992_37_Eng1.indd 41 2008-03-10 10:47:25 AM2008-03-10 10:47:25 AM

Philips DVP5990 Specifications

Power

power supply frequency	50Hz
power supply voltage	230V
power consumption	< 12 W
standby power consumption	< 1.0 W

Sound

D/A converter	24 bit, 192 kHz
signal to noise ratio	> 90
distortion and noise (1kHz)	> 65 dB
crosstalk (1kHz)	> 70 dB
dynamic range (1kHz)	> 80 dB
frequency response	30-20000 Hz

Picture and Display

D/A converter	12 bit, 108 MHz
picture enhancement	Progressive scan, High Def (720p, 1080i, 1080p), Video Upscaling (720p, 1080i/p)

Weight and Dimensions

set dimensions	435 x 38 x 210 mm
packaging dimensions	490 x 82 x 296 mm
set weight	1.4 kg