Philips EasyKey User Manual

22 23
Mute mode indicator
Colors of the light and the corresponding
meanings:
1. White: Indicates the mute mode is o.
2. Green:Indicates the mute mode is on.
Inside deadlock indicator
System lock indicator
When the door is inside dead locked, the digital
functions of the outside escutcheon will be
disabled.
If the system is waken up manually, the keypad
will display the combination of “15937 (X)” and
there will be a voice prompt saying that the inside
deadlock has been enabled.
3 ashes 2 ashes 1 ash
If there are 10
consecutive inputs of
any of the 3 types of
verication methods
(ngerprint/PIN code/
card), this type of
verication will be
locked for 3 minutes.
You can unlock with
the other 2 types of
verication methods.
The prompt only
appears after the
system wakes up.
Types of alarms and alarm modes
[Close] button indicator
Triggering: If the lock is under outside forced
lock mode, unlocking from inside will trigger
the alarm.
Alarm mode: Continuous repeated alarms.
Turning o: The alarm can be turned o by a
successful verication of any type.
Triggering: After waking up, the system will
run an automatic examination on the battery
voltage. If the voltage is too low, the lock give
an alarm and a voice prompt of “Low battery.
Please replace all batteries”.
Alarm mode: A voice prompt of "Low battery.
Please replace all batteries” during unlocking.
Turning o: The alarm will be automatically
turned o.
Colors of the light and the corresponding
meanings:
1. Red light with 2 ashes: Indicates the door
has been locked.
2. Green light with 2 ashes: Indicates the door
has been unlocked.
3. Red light with 1 ash: Indicates the door has
been dead locked.
8 Troubleshooting
Inside unlocking alarm under outside forced lock mode
Low battery alarm, prompting you to replace the batteries in time
Mute mode
Attention
3 minutes 2 minutes 1 minute
indicator

Philips EasyKey Specifications

General

Brand	Philips
Model	EasyKey
Category	Door locks
Language	English