17
ENGLISH
17
MEASURING AND PROGRAMMING WATER HARDNESS
Water hardness measuring is very important in order to de ne the descal-
ing frequency and to install the “INTENZA+” water lter (for more details on
the water lter, see next chapter).
To measure water hardness, follow the steps below:
1
Immerse the water hardness test strip (supplied with the machine) in
water for 1 second.
Note:
The test strip can only be used for one single measurement.
2
Wait for one minute.
23 4
A
B
C
Intenza Aroma System
Machine Water Hardness Setting
1
3
Check how many squares have changed colour to red and then refer to
the table.
Note:
The numbers on the water hardness test strip correspond to the water
hardness adjustment settings.
More precisely:
1 = 1 (very soft water)
2 = 2 (soft water)
3 = 3 (hard water)
4 = 4 (very hard water)
The letters correspond to the references that are located at the base of the
“INTENZA+” water lter (see next chapter).
4
Press the “ ” button and scroll through the options by pressing the “
” button until this icon is displayed.
Press the “
” button to access the function.
Note:
The machine is supplied with a standard water hardness setting, suitable
for most types of water.
Yellow
To Next Page
Loading...
Need help?
General
