54
ENGLISH
Interruption of the Descaling Cycle
Once the descaling cycle has started, you must complete it till the very end
without turning o the machine.
In case you get stuck during the cycle you can exit by pressing the on/o
button.
If this occurs, empty and rinse carefully the water tank, then ll it up to the
CALC CLEAN level.
Follow the instructions provided in the "Manual Rinse Cycle" chapter
before brewing any beverage.
If the cycle was not completed, the machine will require another descaling
cycle to be performed at your earliest convenience.
PROGRAMMING
You can customise the machine functions via the programming menu.
The following settings can be adjusted
Co ee Temperature
This function allows you to adjust the co ee brewing temperature.
GialloGiallo
Timer (stand-by)
This function allows you to adjust the time taken for the machine to go
into stand-by mode after the last brewing.