Philips HTL2161B User Manual

8 EN
Option 2: Connect audio through a
digital coaxial cable
Good quality audio
1 Using a coaxial cable, connect the
COAXIAL connector on your SoundBar
to the COAXIAL/DIGITAL OUT
connector on the TV or other device.
• The digital coaxial connector might be
labeled DIGITAL AUDIO OUT.
Option 3: Connect audio through
analog audio cables
Basic quality audio
1 Using an analog cable, connect the AUX
connectors on your SoundBar to the
AUDIO OUT connectors on the TV or
other device.
DVD
4 Use your
SoundBar
This section helps you use the SoundBar to play
audio from connected devices.
Before you start
• Make the necessary connections described
in the quick start guide and the user
manual.
• Switch the SoundBar to the correct source
for other devices.
Adjust the volume
1 Press +/- (Volume) to increase or decrease
a volume level.
• To mute sound, press (Mute).
• To restore the sound, press (Mute)
again or press +/- (Volume).
Choose your sound
This section helps you choose the ideal sound
for your video or music.
Sound mode
Select predened sound modes to suit your
video or music.
1 Press SOUND to select a sound option
from the display panel.
• AUTO: Automatically select a sound
setting based on the sound stream.
• POWERFUL: Enjoy thrilling arcade
sounds, ideal for action-packed videos
and loud parties.
• BALANCED: Experience the original
sound of your movies and music,
without added sound effects.

Philips HTL2161B Specifications

General

Subwoofer type	Passive subwoofer
Subwoofer included	Yes
Subwoofer frequency range	45 - 200 Hz
Package type	80% recycled corrugated board, Soya based ink
Package depth	300 mm
Package width	790 mm
Package height	225 mm
Package weight	6300 g
FM radio	No
Product color	Black
TV stand usage	-
Audio formats supported	mp3
Consumer Electronics Control (CEC)	EasyLink
Impedance	8 Ω
Tweeter impedance	16 Ω
Number of tweeter drivers	1
Soundbar speaker RMS power	30 W
Total Harmonic Distortion (THD)	10 %
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Docking connector type	Not supported
Sound enhancement technology	Treble and Bass Control
Subwoofer driver diameter (imperial)	5.25 \
Main unit weight	1400 g
Speaker output power	2 x 30W W
Subwoofer dimensions (WxHxD)	165 x 240 x 295 mm
Audio decoders	Dolby Digital
RMS rated power	120 W
Audio output channels	- channels
HDMI version	1.4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless

Weight and Dimensions

Width	- mm
Subwoofer depth	295 mm
Subwoofer width	165 mm
Subwoofer height	240 mm
Subwoofer weight	2500 g
Main unit dimensions (WxDxH)	843 x 60 x 52 mm