Philips HTL2161B User Manual

10 EN
5 To exit Bluetooth, select other source.
• When your switch back to Bluetooth
mode, Bluetooth connection remains
active.
Note
• The music streaming may be interrupted by obstacles
between the device and SoundBar, such as wall, metallic
casing that covers the device, or other devices nearby
that operate in the same frequency.
• If you want to connect your SoundBar with another
Bluetooth device, press and hold on the remote
control to disconnect the currently connected
Bluetooth device.
MP3 player
Connect your MP3 player to play your audio
les or music.
What you need
• An MP3 player.
• A 3.5mm stereo audio cable.
1 Using the 3.5mm stereo audio cable,
connect the MP3 player to the AUDIO IN
connector on your SoundBar.
2 Press AUDIO IN on the remote control.
3 Press the buttons on the MP3 player to
select and play audio les or music.
USB storage devices
Enjoy audio on a USB storage device, such as an
MP3 player and USB ash memory, etc.
What you need
• A USB storage device that is formatted for
FAT or NTFS le systems, and complies
with the Mass Storage Class.
• An MP3 le on a USB storage device
1 Connect a USB storage device to this
product.
2 Press USB on the remote control.
3 Use the remote control to control play.
Button Action
Start, pause or resume play.
/ Skip to the previous or next track.
USB During USB play, press repeatedly to
select a repeat or shufe mode, or
turn off a play mode.
Note
• This product may not be compatible with certain types
of USB storage device.
• If you use a USB extension cable, USB HUB, or USB
multi-reader, the USB storage device may not be
recognized.
• Digital camera PTP and MTP protocols are not
supported.
• Do not remove the USB storage device while it is
being read.
• DRM-protected music les (MP3) are not supported.
• Support a USB port: 5V , 1A.
Auto standby
When playing media from a connected device,
the SoundBar automatically switches to standby
after 15 minutes of button inactivity and no
audio/video play from a connected device.
Set display brightness
You can press DIM repeatedly to select a
different brightness level of the display panel on
this product.

Philips HTL2161B Specifications

General

Subwoofer type	Passive subwoofer
Subwoofer included	Yes
Subwoofer frequency range	45 - 200 Hz
Package type	80% recycled corrugated board, Soya based ink
Package depth	300 mm
Package width	790 mm
Package height	225 mm
Package weight	6300 g
FM radio	No
Product color	Black
TV stand usage	-
Audio formats supported	mp3
Consumer Electronics Control (CEC)	EasyLink
Impedance	8 Ω
Tweeter impedance	16 Ω
Number of tweeter drivers	1
Soundbar speaker RMS power	30 W
Total Harmonic Distortion (THD)	10 %
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Docking connector type	Not supported
Sound enhancement technology	Treble and Bass Control
Subwoofer driver diameter (imperial)	5.25 \
Main unit weight	1400 g
Speaker output power	2 x 30W W
Subwoofer dimensions (WxHxD)	165 x 240 x 295 mm
Audio decoders	Dolby Digital
RMS rated power	120 W
Audio output channels	- channels
HDMI version	1.4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless

Weight and Dimensions

Width	- mm
Subwoofer depth	295 mm
Subwoofer width	165 mm
Subwoofer height	240 mm
Subwoofer weight	2500 g
Main unit dimensions (WxDxH)	843 x 60 x 52 mm