Philips HTL2161B User Manual

11EN
Apply factory settings
You can reset this product to the default
settings programmed at the factory.
1 In any source mode, on the remote control
press Volume -, BASS -, and TREBLE - in
sequence within three seconds.
» When the factory settings restore is
complete, the product automatically
switches off and restarts.
5 Update software
To get the best features and support, update
your product with the latest software.
What you need
• Connect this product to your TV through
HDMI.
Check software version
In HDMI ARC source, on the remote control
press TREBLE -, BASS -, and Volume - in
sequence.
Update software via USB
1 Check the latest software version on
www.philips.com/support.
• Search for your model and click on
"Software and drivers".
2 Download the software into a USB storage
device.
a Unzip the download if zipped, and
makesurethattheunzippedleis
named "HTL2163.bin".
b Putthe"HTL2163.bin"leintheroot
directory.
3 Connect the USB storage device to the
(USB) connector on this product.
4 Switch this product to the HDMI ARC
source, and switch your TV to the HDMI
source.

Philips HTL2161B Specifications

General

Subwoofer type	Passive subwoofer
Subwoofer included	Yes
Subwoofer frequency range	45 - 200 Hz
Package type	80% recycled corrugated board, Soya based ink
Package depth	300 mm
Package width	790 mm
Package height	225 mm
Package weight	6300 g
FM radio	No
Product color	Black
TV stand usage	-
Audio formats supported	mp3
Consumer Electronics Control (CEC)	EasyLink
Impedance	8 Ω
Tweeter impedance	16 Ω
Number of tweeter drivers	1
Soundbar speaker RMS power	30 W
Total Harmonic Distortion (THD)	10 %
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Docking connector type	Not supported
Sound enhancement technology	Treble and Bass Control
Subwoofer driver diameter (imperial)	5.25 \
Main unit weight	1400 g
Speaker output power	2 x 30W W
Subwoofer dimensions (WxHxD)	165 x 240 x 295 mm
Audio decoders	Dolby Digital
RMS rated power	120 W
Audio output channels	- channels
HDMI version	1.4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless

Weight and Dimensions

Width	- mm
Subwoofer depth	295 mm
Subwoofer width	165 mm
Subwoofer height	240 mm
Subwoofer weight	2500 g
Main unit dimensions (WxDxH)	843 x 60 x 52 mm