Philips HTL2161B User Manual

13EN
7 Product
specifications
Note
• Specications and design are subject to change without
notice.
Amplier
• FTC total output power: 40W
• Left + Right: 25W (1%THD, 8ohm,
120Hz-20kHz)
• Subwoofer: 15W (1%THD, 4ohm,
30Hz-80Hz)
• RMS Total output power:
120W RMS (+/- 0.5 dB, 10% THD)
• Frequency response: 20 Hz-20 kHz / ±3 dB
• Signal-to-noise ratio:
> 65 dB (CCIR) / (A-weighted)
• Input sensitivity:
• AUX: 900 mV
• AUDIO IN: 500 mV
Audio
• S/PDIF Digital audio input:
• Coaxial: IEC 60958-3
• Optical: TOSLINK
USB
• Compatibility: Hi-Speed USB (2.0)
• Class support: USB Mass Storage Class
(MSC)
• File system: FAT16, FAT32, NTFS
• Supports MP3 le formats
• Sampling frequency:
• MP3: 8 kHz, 11 kHz, 12 kHz, 16 kHz,
22 kHz, 24 kHz, 32 kHz, 44.1 kHz,
48 kHz
• Constant bit rate:
• MP3: 8 kbps-320 kbps
Bluetooth
• Bluetooth proles: A2DP, AVRCP
• Bluetooth version: 3.0 + EDR
Main unit
• Power supply:
• Model (Philips branded AC power
adapter): DYS602-210309W; AS650-
210-AA309
• Input: 100-240 V~, 50/60 Hz 1.5 A
• Output: 21V , 3.09A
• Standby power consumption: ≤ 0.5 W
• Speaker impedance
• Woofer: 8 ohm
• tweeter: 16 ohm
• Speaker drivers:
2 x (90mm/3.5" x 34mm/1.3") woofer +
2 x 31mm/1.2" tweeter
• Dimensions (WxHxD): 843 x 52 x 60 mm
• Weight: 1.4 kg
Subwoofer
• Impedance: 3.6 ohm
• Speaker drivers: 1 x 134 mm (5.25")
woofer
• Dimensions (WxHxD):
165 x 240 x 297 mm
• Weight: 2.5 kg
Remote control batteries
• 1 x AAA-R03-1.5 V

Philips HTL2161B Specifications

General

Subwoofer type	Passive subwoofer
Subwoofer included	Yes
Subwoofer frequency range	45 - 200 Hz
Package type	80% recycled corrugated board, Soya based ink
Package depth	300 mm
Package width	790 mm
Package height	225 mm
Package weight	6300 g
FM radio	No
Product color	Black
TV stand usage	-
Audio formats supported	mp3
Consumer Electronics Control (CEC)	EasyLink
Impedance	8 Ω
Tweeter impedance	16 Ω
Number of tweeter drivers	1
Soundbar speaker RMS power	30 W
Total Harmonic Distortion (THD)	10 %
AC input voltage	110-240 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.5 W
Docking connector type	Not supported
Sound enhancement technology	Treble and Bass Control
Subwoofer driver diameter (imperial)	5.25 \
Main unit weight	1400 g
Speaker output power	2 x 30W W
Subwoofer dimensions (WxHxD)	165 x 240 x 295 mm
Audio decoders	Dolby Digital
RMS rated power	120 W
Audio output channels	- channels
HDMI version	1.4
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Connectivity technology	Wired & Wireless

Weight and Dimensions

Width	- mm
Subwoofer depth	295 mm
Subwoofer width	165 mm
Subwoofer height	240 mm
Subwoofer weight	2500 g
Main unit dimensions (WxDxH)	843 x 60 x 52 mm