Front suspension
FRONT SUSPENSION
Name Torque in Nm
Speed sensor - Bracket 8.5 ± 2.0 Nm
Fork fastening screws - Plate 29.5 ± 4.5 Nm
Stem cap - Stem 45 ± 10 Nm
Calliper mounting bracket screw - Muffler unit 30 ± 5 Nm
Calliper mounting bracket - Wheel axle 6.5 ± 0.5 Nm
Front wheel axle nut - Wheel axle 47.5 ± 2.5 Nm
Brake calliper - Fork 24.0 ± 2.0 Nm
REAR SUSPENSION
Name Torque in Nm
Shock absorber - Chassis 22.5 - 2.5 Nm
Rear wheel - Wheel axle 130 ± 13 Nm
Stand screws torque 18.5 - 19 N·m
STEERING ASSEMBLY
Name Torque in Nm
Upper lock-nut - Steering tube 37.5 ± 2.5 Nm
Lower lock-nut - Steering tube 9.0 ± 1.0 Nm
Handlebars - Steering tube 52.5 ± 2.5 Nm
Front
Removing the front wheel
To remove the front wheel, sustain the vehicle in
a proper manner so that the wheel is slightly de-
tached from the ground.
- Unscrew the wheel axle fixing nut.
- Loosen the screws of the calliper mounting brack-
et.
NRG 50 Suspensions
SUSP - 157
To Next Page
Loading...
Need help?
General
