- Fill the fork with the specified oil.
Insert the plug in its seat screwing and pressing it
manually. In this way, the initial spring compres-
sion is inhibited.
- Tighten the plug to the prescribed torque.
- Tighten the plate fixing screws at the specified
torque, observing the following tightening order:
1: lower screw .
2: upper screw.
3: lower screw .
- Tighten the lower screw.
- Reinstall everything that was previously re-
moved:
- the front mudguard.
- the front wheel.
- the brake calliper.
- the handlebar.
- the steering bearings.
Steering bearing
NRG 50 Suspensions
SUSP - 173
To Next Page
Loading...
Need help?
General
