Application: Lights - High-beam
lights
Quantity: 1
12V - 2W warning light bulbs Type: ALL GLASS
Application: Engine oil pressure -
Fuel reserve - Helmet
compartment light
Quantity: 3
Application: Turn indicators
Quantity: 2
03_28
Frontlightgroup (03_28, 03_29, 03_30)
To remove the rear light assembly, proceed as follows:
1. Remove the mirror cover, fastened by the two top screws and retained by the lower
rubber ring joining it to the lower fairing;
2. Remove both driving mirrors by loosening the fixing screws "A" on the right and left
hand-side;
3. Loosen the four fixing screws "B" and then remove the headlight cover;
4. Extract the headlight from it housing by loosening the three fixing screws "D";
To reassemble, repeat the operation in the reverse order.
61
To Next Page
Loading...
Need help?
General