EasyManuals Logo
Home>PIAGGIO>Scooter>X8 200

PIAGGIO X8 200 User Manual

PIAGGIO X8 200
88 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #45 background imageLoading...
Page #45 background image
12,000 KM. THE USE OF ELECTRONIC CENTRAL UNITS OR ELECTRONIC IG-
NITIONS DIFFERING FROM THOSE RECOMMENDED CAN SERIOUSLY DAM-
AGE THE ENGINE. IF THE REMOVAL OF THE SPARK PLUG IS ATTEMPTED
AFTER FLOODING THE ENGINE (EXPULSION OF EXCESS FUEL IN THE SEC-
TION «SAFE RIDING»), IT IS RECOMMENDED THAT THE SMALL PIPE TO THE
SPARK PLUG IS KEPT CONNECTED AND THE LATTER IS IN CONTACT WITH
A GROUND FAR FROM THE SPARK PLUG HOLE ITSELF IN ORDER TO AVOID
THE EXPELLED FUEL CATCHING ON FIRE.
Characteristic
Electrode gap
0.7 to 0.8 mm
Electric characteristic
Recommended spark plug (125)
CHAMPION RG4HC
03_09
Removingthesides (03_09, 03_10, 03_11, 03_12, 03_13, 03_14,
03_15, 03_16, 03_17)
Proceed as follows:
1. Remove the pillion handle by loosening the two top, "A", and two bottom, "B", fixing
screws inside the helmet compartment.
2. Loosen the two side-fairing fixing screws, "C".
3. Remove the taillight by loosening the two fixing screws, "D", to be able to remove
the flashing turn indicator fixing screws, "I".
4. Loosen the side-faring screw, "E", underneath the turn signal light.
5. Remove the four side screws, "F".
45
3 Maintenance

Other manuals for PIAGGIO X8 200

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the PIAGGIO X8 200 and is the answer not in the manual?

PIAGGIO X8 200 Specifications

General IconGeneral
BrandPIAGGIO
ModelX8 200
CategoryScooter
LanguageEnglish

Related product manuals