47
Using the Digital Signal Processor (DSP)
Entering the DSP Menu 1
With this Menu, you can adjust the sound field.
Note:
• After entering the DSP Menu 1, if you do not perform an operation within about 30 seconds, the
DSP Menu 1 is automatically canceled.
1. Select the desired mode in the DSP Menu 1.
2. Operate a mode.
3. Cancel the DSP Menu 1.
Grapic Equalizer
Enables adjustment of equalization to match car interior acoustic characteristics as desired.
About FLAT and CUSTOM
7 FLAT
No supplement or correction is made to the sound. A useful function to check the effect of
the equalizer curves by switching alternatively between FLAT and a set equalizer curve.
7 CUSTOM
CUSTOM can be stored as an adjusted equalizer curve.
Adjustment can be made by 11-Band Graphic Equalizer Adjustment.
Recalling the Equalizer Curves
You can easily recall equalizer curves.
7 Direct Recall
1. Press the DSP button and select the Graphic Equalizer mode (ROCK) in the
DSP Menu 1.
Each press changes the Mode ...
To Next Page
Loading...
Need help?
General
