High Pass Filter (HPF)
When you do not want sound in the Subwoofer output frequency range output from the
front or rear speakers, switch the High Pass Filter (HPF) ON. Only higher frequencies than
those in the selected range are output from the front and rear speakers.
1. Press the DSP button and select the High Pass Filter mode (HPF) in the DSP
Menu 2.
3. Select the desired frequency
with the 2/3 buttons.
50 Ô 80 Ô 125 (Hz)
2. Switch the High Pass Filter
function ON/OFF with the 5/∞
buttons.
54
ENGLISH ESPAÑOL DEUTSCH FRANÇAIS
ITALIANO NEDERLANDS
To Next Page
Loading...
Need help?
General
