Pioneer PE6000 Series User Manual

Function Code Tables PE6000 User Manual
44
4 Function Code Tables
If PP-00 is set to a non-zero number, parameter protection is enabled. You must enter the
correct user password to enter the menu.
To cancel the password protection function, enter with password and set PP-00 to 0.
Group P and Group A are standard function parameters. Group U is the monitoring function
parameters.
The symbols in the function code table are described as follows:
"☆": The parameter can be modified when the AC drive is in either stop or running state.
"★": The parameter cannot be modified when the AC drive is in the running state.
"●": The parameter is the actually measured value and cannot be modified.
"*": The parameter is default parameter and can be set only by the manufacturer.

Pioneer PE6000 Series Specifications

General

Brand	Pioneer
Model	PE6000 Series
Category	DC Drives
Language	English