English
OSD (On Screen Display) Controls
12
En
Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET
REFERENCE
PICTURE CONTRAST ←→ 0←52→72 YES 14
BRIGHTNESS ←→ 0←32→64 YES 14
SHARPNESS ←→ 0←16→32 YES 14
COLOR ←→ 0←32→64 YES 14
TINT R←→G 0←32→64 YES 14
AV SELECTION DYNAMIC/STD/MOVIE1/MOVIE2/DEFAULT YES 14
DNR OFF/LOW/MID/HIGH YES 14
COLOR TEMP. LOW/MID LOW/MID/HIGH YES 14
WHITE BALANCE R.HIGH ←→ 0←40→70 YES 15
G.HIGH ←→ 0←40→70 YES 15
B.HIGH ←→ 0←40→70 YES 15
R.LOW ←→ 0←40→70 YES 15
G.LOW ←→ 0←40→70 YES 15
B.LOW ←→ 0←40→70 YES 15
RESET OFF←→ON YES 15
GAMMA 1←→2←
…
→4 YES 15
LOW TONE AUTO←→1←
…
→3 YES 15
C. DETAIL ADJ RED Y←→M0←32→64 YES 15
GREEN C←→Y0←32→64 YES 15
BLUE M←→C0←32→64 YES 15
YELLOW G←→R0←32→64 YES 15
MAGENTA R←→B0←32→64 YES 15
CYAN B←→G0←32→64 YES 15
RESET OFF←→ON YES 15
Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET
REFERENCE
SOUND BASS ←→ 0←13→26 YES 16
TREBLE ←→ 0←13→26 YES 16
BALANCE L←→R -22←0→+22 YES 16
AUDIO INPUT1 VIDEO 1-3 / COMPNT 1-2 / PC1DSUB / PC2-BNC / PC3-DVI YES 16
AUDIO INPUT2 VIDEO 1-3 / COMPNT 1-2 / PC1DSUB / PC2-BNC / PC3-DVI YES 16
AUDIO INPUT3 VIDEO 1-3 / COMPNT 1-2 / PC1DSUB / PC2-BNC / PC3-DVI YES 16
Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET
REFERENCE
SCREEN SCREEN SIZE 4:3/FULL/WIDE/ZOOM/2.35:1/14:9 — 16
V.POSITION ←→ -64←0→+64 YES 16
H.POSITION ←→ -128←0→+127 YES 16
V.SIZE ←→ 0←→64 YES 16
H.SIZE ←→ 0←→64 YES 16
AUTO PICTURE OFF←→ON*
2
NO 16
PHASE*
1
←→*
2
0←→64 YES 16
CLOCK*
1
←→*
2
0←64→128 YES 16
Main menu Sub menu Sub menu 2 Sub menu 3 Sub menu 4 RESET
REFERENCE
OPTION1 OSD DISPLAY OSD OFF←→ON YES 17
OSD ADJUST 1←
…
→6 YES 17
OSD ANGLE H←→V YES 17
OSD ORBITER OFF←→ON YES 17
OSD CONTRAST LOW←→NORMAL YES 17
BNC INPUT RGB←→COMP.←→SCART1←→SCART2 YES 17
D-SUB INPUT RGB←→SCART3 — 17
RGB SELECT AUTO/STILL/MOTION/WIDE1/WIDE2/WIDE3/WIDE4/DTV YES 18
HD SELECT 1080B/1035I/1080A NO 18
INPUT SKIP OFF←→ON YES 18
ALL RESET OFF←→ON —18
:Shaded areas indicate the default value.
←→
: Press the
or
button to adjust.
:Menu items in a ruled box are available when the ADVANCED OSD is set to ON.
Menu Tree
To Next Page
Loading...
Need help?
General