Polaris DP-20 User Manual

DP-20 WEB GUIDE CONTROLLER USER MANUAL
6
6-19
7. Press the ENTER key to store the change or
press the MANUAL key to abort the procedure.
The system will exit the setup menus, and
return to the Operator Level.
3A
MANUAL
× -ãããããáÜÜÜÜ+
3X.2.7, Set Sensor Type
1. Press the SETUP key to enter the Setup
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
2. Use the ARROW keys to scroll until SPECIAL
is displayed on line 4.
3. Press the ENTER key to enter the Special
Menus. The DEADBAND menu will be
displayed.
4. Use the ARROW keys to scroll until SET
SENSOR TYPE is displayed on line 3. The
current sensor type is displayed on Line 4.
5. Press the ENTER key to enter the SET
SENSOR TYPE menu. The current sensor type
begins flashing on line 4.
6. Use the ARROW keys to scroll to the desired
sensor type, EDGE SENSOR or LINE
SENSOR as indicated on line 4.
7. Press the ENTER key to store the change or
press the MANUAL key to abort the procedure.
The system will exit the setup menus, and
return to the Operator Level.
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
× 3A.2
SETUP (MAN)
SELECT MENU
SPECIAL
× 3A.2.1
SETUP (MAN)
DEADBAND
-ÜÜÜÜÜÜÜ+ 0.0%
EDGE SENSOR ×Ø
× 3A.2.7
SETUP (MAN)
SET SENSOR TYPE
× 3A.2.7.1
SETUP (MAN)
SET SENSOR TYPE
EDGE SENSOR ×Ø
ý 3D.2.7.2
SETUP (MAN)
SET SENSOR TYPE
LINE SENSOR ýŁ
3D
MANUAL
ý -ãããããáÜÜÜÜ+
06-05-2007 DP-20 WEB GUIDE CONTROLLER Figure Sheet 1-862-D

Polaris DP-20 Specifications

General

Brand	Polaris
Model	DP-20
Category	Controller
Language	English