DP-20 WEB GUIDE CONTROLLER USER MANUAL
6
6-21
3. Press the ENTER key to enter the Advanced
Menus. The RESTORE SETTINGS menu will
be displayed.
4. Use the ARROW keys to scroll until BACKUP
SETTINGS is displayed on line 3.
5. Press the ENTER key to enter the BACKUP
SETTINGS menu. In Line 4 the word YES will
begin flashing.
6. Use the ARROW keys to select YES or NO.
7. Press the ENTER key to store the Backup
Settings (if YES was selected in step 6) or
press the MANUAL key to abort the procedure.
The system will exit the setup menus, and
return to the Operator Level.
× 3A.3.1
SETUP (MAN)
RESTORE SETTINGS
× 3A.3.2
SETUP (MAN)
BACKUP SETTINGS
× 3A.3.2.1
SETUP (MAN)
BACKUP SETTINGS
SURE? YES
× 3A.3.2.1
SETUP (MAN)
BACKUP SETTINGS
SURE? YES
3A
MANUAL
× -ãããããáÜÜÜÜ+
3X.3.3, Set Password, Enter Password
(Use these menu instructions if no password is currently stored).
1. Press the SETUP key to enter the Setup
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
2. Use the ARROW keys to scroll until
ADVANCED is displayed on line 4.
3. Press the ENTER key to enter the Advanced
Menus. The RESTORE SETTINGS menu will
be displayed.
4. Use the ARROW keys to scroll until SET
PASSWORD is displayed on line 3. If (NO
PASSWORD) is displayed on Line 4, this
indicates that no password has been entered.
5. Press the ENTER key to enter the SET
PASSWORD menu. The LCD Panel will display
ENTER PASSWORD on line 3.
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
× 3A.3
SETUP (MAN)
SELECT MENU
ADVANCED
× 3A.3.1
SETUP (MAN)
RESTORE SETTINGS
× 3A.3.3
SETUP (MAN)
SET PASSWORD
(NO PASSWORD)
× 3A.3.3.2
SETUP (MAN)
ENTER PASSWORD
06-05-2007 DP-20 WEB GUIDE CONTROLLER Figure Sheet 1-862-D
To Next Page
Loading...
Need help?
General
