DP-20 WEB GUIDE CONTROLLER USER MANUAL
6
6-20
Advanced Menus
3X.3.1, Restore Settings
1. Press the SETUP key to enter the Setup
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
2. Use the ARROW keys to scroll until
ADVANCED is displayed on line 4.
3. Press the ENTER key to enter the Advanced
Menus. The RESTORE SETTINGS menu will
be displayed.
4. Press the ENTER key to enter the RESTORE
SETTINGS menu. In Line 4 the word YES will
begin flashing.
5. Use the ARROW keys to select YES or NO.
6. Press the ENTER key to restore the Backup
Settings (if YES was selected in step 5) or
press the MANUAL key to abort the procedure.
The system will exit the setup menus, and
return to the Operator Level.
× 3A.1
SETUP (MAN)
SELECT MENU
BASIC
× 3A.3
SETUP (MAN)
SELECT MENU
ADVANCED
× 3A.3.1
SETUP (MAN)
RESTORE SETTINGS
× 3A.3.1.1
SETUP (MAN)
RESTORE SETTINGS
SURE? YES
06-05-2007 DP-20 WEB GUIDE CONTROLLER Figure Sheet 1-862-D
3X.3.2, Backup Settings
This procedure stores all user configurable settings, except Language,
Password, Password Configuration, and Parallel Port Enable/Disable.
1. Press the SETUP key to enter the Setup
Menus. The SELECT MENU screen will be
displayed on the LCD Panel.
2. Use the ARROW keys to scroll until
ADVANCED is displayed on line 4.
× 3A.3.1.1
SETUP (MAN)
RESTORE SETTINGS
SURE? YES
× 3A.1
3A
MANUAL
× -ãããããáÜÜÜÜ+
SETUP (MAN)
SELECT MENU
BASIC
× 3A.3
SETUP (MAN)
SELECT MENU
ADVANCED
To Next Page
Loading...
Need help?
General
