EasyManuals Logo
Home>Polaris>Offroad Vehicle>Ranger 400 HO

Polaris Ranger 400 HO User Manual

Polaris Ranger 400 HO
118 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #80 background imageLoading...
Page #80 background image
76
MAINTENANCE
Throttle System
Failure to check or maintain proper operation of the throttle system can result in
an accident and lead to serious injury or death if the throttle pedal sticks during
operation.
Always check the pedal for free movement and return before starting the engine
and occasionally during operation. Never start or operate this vehicle if it has a
sticking or improperly operating throttle pedal. Immediately contact your dealer
for service if throttle problems arise.
Throttle Freeplay
If the throttle pedal has excessive
play due to cable stretch or mis-
adjustment, it will cause a delay
in throttle response, especially at
low engine speed. The throttle
may also not open fully. If the
throttle pedal has no freeplay, the
throttle may be hard to control,
and the idle speed may be erratic.
Check the throttle pedal freeplay
at the intervals outlined in the
Periodic Maintenance Chart
beginning on page 48. Adjust the
freeplay if necessary.
Throttle Freeplay Inspection
1. Place the transmission in PARK.
2. Start the engine. Allow it to warm up thoroughly.
3. Measure the distance the throttle pedal moves before the engine
begins to pick up speed. Freeplay should be 1/16 to 1/8 inches (1.6-
3.2 mm).
WARNING
Throttle
Pedal

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Polaris Ranger 400 HO and is the answer not in the manual?

Polaris Ranger 400 HO Specifications

General IconGeneral
BrandPolaris
ModelRanger 400 HO
CategoryOffroad Vehicle
LanguageEnglish

Related product manuals