26
FEATURES AND CONTROLS
Console
Park Brake Lever
To help prevent the vehicle from rolling, set the park brake when park-
ing the vehicle. When the park brake is set and the park brake indicator
is illuminated, motor speed is limited. If the accelerator is applied, this
limiting feature prevents operation, which protects the park brake pads
from excessive wear.
Tip: This feature will not operate properly if the park brake connector or switch
(under the hood) malfunctions or becomes disconnected, or if the switch
has moved. Check for disconnection, then see your dealer promptly if this
feature fails to operate properly.
Always apply the service brakes before engaging or releasing the park
brake.
1. Apply the brakes.
2. Pull the park brake lever downward as far as possible.
3. To release the park brake, apply the brakes. Press the park brake
release inward and move the lever upward as far as possible.
Charging Cord
The charging cord is located
inside the charge plug holder
on the console. See page 72
for charging instructions.
To Next Page
Loading...
Need help?
General
