59
MAINTENANCE
Gearcases
Gearcase Specification Chart
Main Gearcase (Transaxle)
Always check and change the main
gearcase oil at the intervals outlined
in the Periodic Maintenance Chart
beginning on page 56. Maintain the
oil level even with the bottom thread
of the fill plug hole.
Refer to the Gearcase Specifications
Chart for recommended lubricants,
capacities and torque specifications.
See page 82 for the part numbers of
POLARIS products.
Oil Check
The fill plug is located at the
right rear of the vehicle.
1. Position the vehicle on a
level surface.
2. Remove the fill plug.
3. Check the oil level.
4. Add the recommended oil
as needed.
5. Reinstall the fill plug.
Torque to specification.
Gearcase Lubricant Capacity Fill Plug
Torque
Drain Plug
Torque
Main Gearcase
(Transaxle)
Premium ATV Angle
Drive Fluid
20.3 oz.
(600 ml)
14 ft. lbs.
(19.4 Nm)
14 ft. lbs.
(19.4 Nm)
Front Gearcase Demand Drive Plus
Fluid
5.1 oz.
(150 ml)
8-10 ft. lbs.
(11-13.6 Nm
11 ft. lbs.
(15 Nm)
To Next Page
Loading...
Need help?
General
