38
OPERATION
Failure to operate the vehicle properly can result in a collision, loss of control,
accident or overturn, which may result in serious injury or death. Read and
understand all safety warnings outlined in the safety section of this owner’s
manual.
Pre-Ride Inspection
Failure to inspect and verify that the vehicle is in safe operating condi-
tion before operating increases the risk of an accident. Always inspect
the vehicle before each use to make sure it's in safe operating condition.
Item Remarks Page
Brake system/pedal travel Ensure proper operation 35
63
Brake fluid Ensure proper level 63
Front suspension Inspect, lubricate if necessary 58
Rear suspension Inspect, lubricate if necessary 58
Steering Ensure free operation 65
Tires Inspect condition and pressure 7
66
Wheels/fasteners Inspect, ensure fastener tightness 66
Frame nuts, bolts, fasteners Inspect, ensure tightness -
Accelerator Ensure proper operation 35
Indicator lights/switches Ensure operation 30
Headlamp Check operation, apply POLARIS
dielectric grease when lamp is
replaced
68
Brake light/tail lamp Check operation, apply POLARIS
dielectric grease when lamp is
replaced
70
Seat belts Check length of belt for damage,
check latches for proper operation
37
Latches (hood/tailgate/seat) Ensure all latches are secure -
Batteries Ensure full charges, proper water
levels, clean terminals
71-74
Battery cables Inspect for proper cable routing and
secure connections
73
To Next Page
Loading...
Need help?
General
