67
MAINTENANCE
Tires
Wheel Removal
1. Apply the brakes.
2. Set the park brake.
3. Turn the key off.
4. Loosen the wheel nuts slightly.
5. Elevate the side of the vehicle by placing a suitable stand under the
frame.
6. Remove the wheel nuts and washers. Remove the wheel.
Wheel Installation
1. Set the park brake.
2. Place the wheel in the
correct position on the
wheel hub. Be sure
the valve stem is
toward the outside
and rotation arrows
on the tire point
toward forward rota-
tion.
WARNING! Improperly
installed wheels can
adversely affect tire wear and
vehicle handling, which can
result in serious injury or
death. Always ensure that all nuts are torqued to specification. Do not service
axle nuts that have a cotter pin installed. See your POLARIS dealer.
3. Attach the wheel nuts and washers and finger tighten.
4. Carefully lower the vehicle to the ground.
5. Torque the wheel nuts to specification. See page 66.
To Next Page
Loading...
Need help?
General
