36
FEATURES AND CONTROLS
Roll-Over Protection System (ROPS)
The Rollover Protective
Structure (ROPS) on this
vehicle meets OSHA 1928.53
rollover performance
requirements. Always have
your authorized POLARIS
dealer thoroughly inspect the
ROPS if it ever becomes
damaged in any way.
No device can assure occu-
pant protection in the event of
a rollover. Always follow all
safe operating practices out-
lined in this manual to avoid
vehicle rollover.
WARNING! Vehicle rollover could cause severe injury or death. Always avoid
operating in a manner that could result in vehicle rollover.
Seat Removal
Pull up on the front of the seat to disengage the front latches. Slide the
seat forward and lift it away from the seat base.
To reinstall the seat, align the rear seat tabs with the slots on the rear of
the seat base. Slide the seat fully rearward, then push down firmly along
the front edge of the seat to secure the latches.
To Next Page
Loading...
Need help?
General
