Polaris Ranger RZR 800 User Manual

5.18
BODY / STEERING / SUSPENSION
BODY COMPONENT REMOVAL
Seats
1. To remove any of the seats, lift upward on the latch lever
located behind the seat bottom.
2. Lift upward and forward on the seat while lifting up on the
latch lever and remove the seat from the vehicle.
Rear Service Panel (RZR / RZR S)
1. Remove driver and passenger seats.
2. Turn both latches 1/4 turn to disengage the panel.
3. Lift the panel upward and towards the front of the vehicle
to remove it.
Rear Console Cover (RZR 4)
1. Remove the rear passenger seats.
2. Turn both latches 1/4 turn to disengage the cover.
3. Pull out on the top while pressing on the center of the lower
portion of the cover to free it from the vehicle.
4. Lift the cover upward and towards the front of the vehicle
to remove it.
Front Bumper
1. Remove the (4) push rivets from the sides of the front
bumper.
2. Remove the (6) Torx screws retaining the upper, middle
and lower portion of the bumper.
3. Disconnect the front head lamp connectors and remove the
front bumper from the vehicle.
Latch
Lever
Push
Rivets
Torx
Screws
www.midwestmanuals.com www.green-manuals.com

Polaris Ranger RZR 800 Specifications

General

Brand	Polaris
Model	Ranger RZR 800
Category	Utility Vehicle
Language	English