5.26
BODY / STEERING / SUSPENSION
Upper Steering Shaft Removal (EPS Models)
1. Remove the (2) Torx-head fasteners retaining the black
plastic cover and remove the cover from the vehicle.
2. Remove the pinch bolt retaining the upper steering shaft to
the power steering unit.
3. Remove the fastener retaining the upper portion of the
steering wheel tilt shock to the pivot tube. Swing the shock
down out of the way.
4. Lift the steering wheel up and remove the (2) fasteners that
retain the pivot tube.
5. Remove the steering shaft, pivot tube and steering wheel
from the vehicle as an assembly.
6. If replacing the upper steering shaft or steering wheel, refer
to “Steering Wheel Removal (EPS Models)”.
Remove
Remove
Remove as
an assembly
www.midwestmanuals.com www.green-manuals.com
To Next Page
Loading...
Need help?
General
