9.13
BRAKES
9
Caliper Disassembly
1. Remove both brake pads from the caliper (see “FRONT
BRAKE PADS - Pad Removal”).
2. Remove mount bracket assembly and dust boots.
3. Thoroughly clean the caliper before disassembly and
prepare a clean work area for disassembly.
4. Use a commercially available caliper piston pliers to extract
the pistons from the caliper.
IMPORTANT: Do not remove the caliper pistons with
a standard pliers. The piston sealing surfaces will
become damaged if a standard pliers is used.
5. Once the pistons are removed, use a pick to carefully
remove the square O-rings from the caliper. O-rings should
be replaced during caliper service.
6. Clean the caliper body, piston, and retaining bracket with
brake cleaner or alcohol.
NOTE: Be sure to clean seal grooves in caliper
body.
RZR / RZR S
RZR 4
RZR / RZR S
Clean
Components
RZR 4
Clean
Components
www.midwestmanuals.com www.green-manuals.com
To Next Page
Loading...
Need help?
General
